Fr4 / G10 / 3K Carbon Fiber ( Fibre ) Supplies & CNC Cutting / Routing Service – 3D Design & 3D Printing & Rapid Prototyping

3K Carbon Fiber Fr4 G10 Supplies & CNC Routing Service

2D & 3D CAD DESIGN

We are a computer aided design and CNC routing / cutting service. We Stock and supply 3K Carbon Fiber, FR4 / G10 laminates. We also stock small useful ancillaries parts, black steel, black nylon and stainless fixings that will help you to construct your models and project.

We are based in the UK, Surrey England, and we ship worldwide.

CNC ROUTING

Our main area of expertise is design and fabrication of parts made from FR4, G10 and 3K 2×2 twill Carbon Fiber ( Fibre ) (CF) laminates. These can just be flat designs cut outs of FR4, G10 and CF or flat parts that can be assembled with one another to create something like, an air-frame, camera mount, crash protection cage, anti-vibration camera mount, car chassis, or any other panel for your project.

3K Carbon Fiber Fr4 G10 Supplies & CNC Routing Service

Fr4 / G10 Sheet Laminate

We hold a good stock of BLACK FR4 / G10 in 1.0, 1.6, 2.0, 2.4, 3.0 and 4.0 mm thickness’s.  These can be found within our shop in standard sizes of 170 x 300 mm, 300 x 400 mm and 450 x 600mm.

Should you require a sheet of laminate in a size not listed, then please send an Email with your requirements.

We also have a slightly limited stock of 1.6 mm in Red, White. And 1.0mm in Red

We have good stock of  Natural Fr4 (green/yellowish, jade) which would be cut to order, in the same sizes.

3K Carbon Fiber Fr4 G10 Supplies & CNC Routing Service

3K CARBON FIBER

We stock 3K carbon fiber flat sheets.  Its smooth both sides and has a gloss/matt finish.

We have a limited stock of MATT 3K carbon fiber (fibre), please call (1, 1.5 ,2.0 2.5, 3.0 4.0 and 5.0mm).

3K Carbon Fiber Fr4 G10 Supplies & CNC Routing Service

3D Design & 3D Printing

Our in-house 3D design & printing service allows use to quickly transform your idea into a physical part that you can hold in your hand. We use an FFF printer that is used to rapid prototype projects for one off to small production runs.  We like to print in ABS as its a tough strong material, though harder to print than some other materials it’s worth the effort.  We normally print in black though we also have yellow and red.  It also only take a couple of days to get in another colour that you may like.

The actual process of printing the part is relatively slow a small part may take 1-3 hours to complete.

Help Files

If you are looking for any of our videos / help files / support documents either look under the Help menu, or jump over to our YouTube Channel or read our Blog

CUSTOM PARTS- ZMR 250 3K Carbon Fiber Arms

You will find many parts / products deigned in-house that will assist you in the building of your model. If you are having a hard time squeezing all of your electronics or FPV equipment into a small space then we hope that you will find a part that can be simply installed, giving you some more space, and/or better separation distance between your RX receiver and FPV transmitter for example. If not drop us an email and we will quickly design one for you.

We also have RF shields for the GoPro and the Mobius cameras. These cameras give off nasty RF that can affect your flight control system.

REMEMBER:-To reconfigure & Double check

For Parts related to radio controlled (RC) models when modifying your aircraft / multirotor / drone/ mini quad/ plane/ boat / car/ motor bike / model with any additional parts or the relocation of them, it is vital that you re-calibrate you flight controller / RC equipment, check the centre of gravity, and fully understand what affect the additional parts/relocation will have on the control ability of your project.

We can’t be held responsible for any damaged caused by you failing to check this or not understanding your actions. You should also conduct ground tests before any flights/runs to ensure everything is secure, tight and all flight control systems, radio control equipment are functioning correctly. If you are using RC equipment always configure the FAIL SAFE and/or RETURN TO HOME and thoroughly understand how it functions.

Happy & Safe Flying

GaaTech

Updated 2/3/2016

Tags:- fr4 white, fr4 red, fr4 black, fr4, 3k carbon, carbon sheet, carbon laminate sheet, cnc, routing cnc, cutting cnc services, 3d printing, vacuum forming, cad design, 3d design, fr4 london, fr4 surrey, carbon fiber cutting, carbon fibre cutting, carbon fiber routing, carbon fibre routing, routing services fr4 southeast, fr4 uk, fr4 coloured, fr4 colour white, g10 red, g10 black, g10 FR4 / G10 / Carbon Fiber Supplies & CNC Cutting / Routing Service

www.gaatech.com – Online Web Store