Supplied from the UK & Italy – Fr4 G9 GPO3 G10 GRP Epoxy Eplastic glass laminate sheets plates
FR4 & G10 In various sheet sizes, colours and thickness’s
We Supply Fr4 G9 GPO3 G10 GRP Epoxy Eplastic glass laminate sheets, natural, black, red and white. We deal directly with a local manufacturer and we buy in bulk. This enables us to keep good stock and keep our prices competitive.
We only stock FR4 – G10 only appears to allow google to find us better.
The coloured sheets we have made to order. We have good stock of black in 0.3, 0.5, 1, 1.6, 2.0, 2.4, 3, 4 & 5mm and a smaller amount of 1.6mm in white and red.
Our stock of natural Fr4 is slight more better 0.4, 0.8, 1.0, 1.6, 2.0, 2.4, 3.0, 4.0 and 5.0mm
We purchase the sheets at 1220 x 915 mm and trim them down in-house on a CNC machine.
The standard sheet sizes we supply / sell are:-
Supplied from the UK & Italy Fr4 G10 G9 GPO3 GRP Epoxy Eplastic glass laminate sheets
Natural, Black, Red and White
- 170 x 300 mm – This size is being phased out
- 200 x 300 mm
- 300 x 400 mm
- 450 x 600 mm – Read the notes below
We use these sizes mainly as they are easy to post within tough cardboard packets. Some sheets may be sent out slightly over sized. This is because if we receive oversized sheets, we don’t like to waste the 10 or 15mm, trimming them down to an exact size, unless you request it. We feel its much better to send it to you.
IF YOU REQUIRE BIGGER SHEETS PLEASE CALL
We can also cut your custom sheet size / designs as required
450 x 600mm Sheets This service is under review
Our 450 x 600mm sized sheets have to be dispatched using Parcel Force, as they are too large for Royal Mail. The only problem with this is the collection is at 3pm, so if you order after 1.00pm, your order will get shipped the next day, and if ordered on a Thursday or Friday that means you will not get your delivery until the following Tuesday Wednesday, respectively, as Parcel Force do not deliver over the weekend.
Other sheet sizes available upon request, bigger, smaller and other dimensions.
NOTE:- FR4 is manufactured to a tolerance with regards its thickness. If you require an exact thickness for a project please call before ordering. If thickness is vital, please contact us and we can measure our current batch.
Normally find that the thickness is +/- 5 to 12% apart from the very thin sheets that are greater
|mm||mm +/-||% +/-|
|0.2 to 1.2||0.05 – 0.18||20.0|
|3.0 & 3.20||0.32||9.6|
Although we may only show a relatively low number of small sheets available in stock, we hold a larger amount of FR4 in much larger sheet sizes. These are cut down as required, so if you wish to order a larger amount than that shown, its would not normally be a problem. You can also contact us beforehand if concerned.
All of our Fr4 sheets are classed as “Industrial Laminates” and not “Cosmetic Finished Panels” so some sheets may have slight surface imperfections, though generally the surface finish is totally flat and imperfection free. As our black sheets have a soft protection film applied during manufacturing we are unable to check the surface condition.
90% of our BLACK sheets have a soft plastic film applied both side for protection. All of the NATURAL sheets are not protected.
Should you require a bulk order we would offer you a discount
When purchasing multiple sheets of the same size and colour on our website discounts are automatically applied for 4 of more sheets.
CNC Routing Service
FR4 is used for most of out flat parts and assemblies
FR4 Not G10
FR4 and G10 are very similar materials, put side by side you would not be able to tell the difference. They have the same strength, weight and look the same. FR4 is Fire Retardant – G10 is not.
Stock – We Cut From Larger Sheets
Although we may only show a relatively low number of small sheets available in stock, we hold a larger amount of FR4 in larger sheet sizes. These are cut down as required, so if you wish to order a larger amount than that shown, its would not normally be a problem. You can also contact us beforehand if concerned.
Should you require a bulk order we may be able to offer you a discount
Protect Yourself For The FR4 Dust
Warning – DUST:- If you are going to cut this product yourself ensure that your protect yourself against the dust that will be generated. We highly recommend that your wear a correctly rated half mask respirator. Protective respiratory masks comply to EN149:2001
FFP1 Total inward leakage 22% Filtering Efficiency 78%
FFP2 Total inward leakage 8% Filtering Efficiency 92%
FFP3 Total inward leakage 2% Filtering Efficiency 98% (N100 Equivalent)
This means that an FFP3 Respirator Mask would filter out at least 98% of the airborne repairable particles, whereas an FFP1 Respirator Mask would filter out at least 78% of the repairable particles. FFP3 Respirator Masks are therefore most efficient respiratory masks in filtering out fine particles including viruses, mould spores & asbestos. Therefore ensure that you purchase a good fitting FFP3 Mask.
Fr4 / Carbon Fiber Dust & Sharp Edges
Fr4, G10, Carbon Fiber and other tough laminates that we sell are cut / milled upon a CNC router or wet saw. In this process dust is created. We do our utmost to remove the dust via washing.
Care must be taken when handling these products and you must ensure to protect yourself against dust and any sharp edge, by wearing a suitable respirator / dust mask and gloves.
Tags:- G10 Fr4 surrey london uk cnc routing cutting laminate carbon black red white natural green grp glassfiber glassfibre glass fiber fibre flame retardant high pressure laminate of epoxy resin and woven glass cloth, g10 fiberglass sheet, g10 fiberglass properties, g10 sheet uk, black g10 sheet, g10 fr4 glass epoxy sheet, g10 sheets for sale, g10 fr4 fiberglass sheets, g10 fr4 uk for sale, g10 fr4 cnc cutting machining routing, g10 material uk, g10 platic uk, carbon fibre cutting service uk
Monday to Friday
9:00am to 5:00pm
Should you receive the answer phone, please leave a message as if the CNC machine is running we are unable to answer the phone. We do check for missed calls regularly.
+39 3756303405 (Italian - English only)
sales @ gaatech.com
If you have any suggestions to make this website easier to use, then please get in touch as we welcome your help to make your experience more enjoyable.