CNC Router Spoil Board Upgrade

CNC Router Spoil Board Upgrade

Polymer Identification by Burnination Feb 20, 2016 | Laser Cutting/Engraving | 1 CommentPolymer Identification by Burnination A very helpful video found on the web.  Its demonstrates how to identify materials before you laser cut or engrave them.  A must...
Quanum NEON 250 Carbon Race Frame Kit With LEDs

Quanum NEON 250 Carbon Race Frame Kit With LEDs

Quanum Neon 250 Quanum NEON 250 Carbon Race Frame Kit With LEDs This is a frame from HobbyKing. A cheap carbon 250mm sized frame with LED’s front and back. But there is a problem if you try and install 1804 motors that are only 15mm high, that’s from the...
Polymer Identification by Burnination

Polymer Identification by Burnination

Polymer Identification by Burnination A very helpful video found on the web.  Its demonstrates how to identify materials before you laser cut or engrave them.  A must watch video, Polymer Identification by Burnination. Many thanks to Zach...
Very Basic 3D Printing – Using CURA April 2015

Very Basic 3D Printing – Using CURA April 2015

3D Printing A Basic Introduction Using Cura Quite a long video that introduces you to the world of 3D Printing Very Basic 3D Printing – Using CURA April 2015 Very Basic 3D Printing Using CURA April 2015 very basic introduction in to 3 D printing.  This video was...
CNC Routing Chinese Samurai Wall Clock

CNC Routing Chinese Samurai Wall Clock

Chinese Samurai wall clock CNC routed black Fr4 The clock is made for black Fr4 / G10.  It measures around 330mm in diameter.  The clock is backed with a white plastic sheet to mask the clocks mechanism. This will be replaced with white plastic.  This was also cut on...

Pin It on Pinterest