Description
DJI Phantom
External Dual Battery Brackets
for larger Lipo’s upto 5000mha size
These brackets will allow you to install standard lipos onto you phantom V1
Fitting:-
Remove the bolts securing your legs and discard the bolts.
Position the battery tray between the body and the legs and use the supplied bolts.
Remember to use the appropriate thread lock to prevent the bolts from vibrating loose. DO NOT USE standard blue thread lock otherwise you will melt the plastic body of your Phantom. Please see this
The standard Phantom 1 uses a single Lipo battery (2200mah)
Designed in white FR4 to hold up to two 5000 mah batteries (or smaller) (batteries, interconnecting wiring and DJI Phanton, camera mount not included)
These are large brackets. If you are going to use 2200mah batteries use these brackets
As with all modifications installed make sure that you re-calibrate your model before flight as the center of gravity may have been affected. Make sure that your craft is able to lift the added weight.
Please note :- These item will be cut to order normally with 2 days
Should you require “hook and loop” type battery straps these can be found in our store here.
The Phantom, battery, props, camera mount/gimbal, motors etc are only shown for demonstration purposes.
Warning!!!
Do not use these two batteries when carrying a camera gimbal and camera as well. By adding the additional battery and the trays you add weight . The Phantom V1 was never designed to carry twin batteries, camera gimbal and a camera, it just to heavy, your motors will overheat, your speed controller may fail, which may result in a crash.
Reviews
There are no reviews yet.