Paul Cheetham- Catapult

Paul contacted me regarding some Fr4 to allow him to construct a catapult.  Paul purchased some white, black and red.  Below is the result.

Paul added:-

Please find attached a photo of a catapult I recently made for a customer using 1.6mm Black G10, 1.6mm Red G10 and 4.0mm Black G10 all supplied by yourself. Your G10 gives a far better finish, when polished, than G10 from China which has a more “plastic” feel, I suspect they are using an inferior resin. If this photo is of any use to you then please feel free to use it.

Pauls Facebook Page :- Custom Catapults

Pauls Instagram Page :- Custom_Catapults